Testeur de valeur de libération d'air automatique HK-0308A
Marque : HKOrigine du produit : Chine
Heure de livraison : dans les 30 jours suivant la réception du paiement intégral de la TT
Capacité d'approvisionnement : 100 ensembles/mois
Le testeur automatique de dégazage HK-0308A est conforme à la méthode d'essai standard ASTM D3427 pour les propriétés de dégazage des huiles de pétrole. L'agitation de l'huile de lubrification avec de l'air dans les équipements tels que les roulements, les accouplements, les engrenages, les pompes et les conduites de retour d'huile peut entraîner la dispersion de fines bulles d'air. Si le temps de séjour dans le réservoir est trop court pour permettre aux bulles d'air de remonter à la surface de l'huile, un mélange d'air et d'huile circulera dans le système de lubrification. Cela peut entraîner une incapacité à maintenir la pression d'huile (en particulier avec les pompes centrifuges), des films d'huile incomplets dans les roulements et les engrenages, et un mauvais fonctionnement, voire une panne, du système hydraulique. Cette méthode d'essai mesure le temps nécessaire à la teneur en air entraîné pour atteindre une valeur relativement faible de 0,2 % en volume dans des conditions d'essai normalisées. Elle permet ainsi de comparer la capacité des huiles à séparer l'air entraîné lorsque le temps de séparation est disponible. L'intérêt de cette méthode d'essai n'a pas été pleinement établi. Cependant, l'air entraîné peut entraîner un caractère spongieux et un manque de sensibilité de la commande des turbines et des systèmes hydrauliques. Cet essai peut ne pas convenir au classement des huiles dans les applications où les temps de séjour sont courts et les teneurs en gaz élevées.
Overview
HK-0308A Automatic Air Release Value Tester conforms to ASTM D3427 Standard Test Method for Air Release Properties of Petroleum Oils. Agitation of Lubricating oil with air in equipment，such as bearings, couplings, gears， pumps, and oil reture lines， may produce a dispersion of finely divide air bubbles in the oil. If the residence time in the reservoir is too short to allow the aire bubbles to rise to the oil surface, a mixture of air and oil will circulate through the lubricating oil system. This may result in an inability to maintain oil pressure (particularly with centrifugal pumps), imcomplete oil films in bearings and gears, and poor hydraulic system performance or failure.
This test method measures the time of the entrained air content to fall to the relatively low value of 0.2% volume under a standardized set of test conditions and hence permits the comparison of the ability of oils to separate entrained air under conditions where a separation time is available. The significance of this test method has not been fully established. However, entrained air can cause sponginess and lack of sensitivity of the control of turbin and hydraulic systems. This test may not be suitable for ranking oils in applications where residence times are short and gas contents are high.
Features
Touch screen operation, connect the balance to display the quality of the standard glass column, and automatically convert the density
The instrument automatically timed, switched inflation, calculated the end result, stored, transmitted
Built-in air heater, safe and fast
Built-in circulating water, automatic heating and constant temperature
Technical parameters
Rated voltage：AC 220V±10% 50Hz
Power：700W
Operation mode：Touch screen
Temperature range：Ambient～100℃
Temperature accuracy：±0.1℃
Temperature sensor：Pt100（platinum resistance）
Circulating mode：High temperature pump circulation
Ambient requirements：Temperature 5～40℃；Humidity≤85%
Packaging & Shipping
1 How to deliver?
We can send by Express or by Air. Also we have best transportation solution for DHL, FEDEX, UPS,TNT faster and cheaper
2 What if it broken during transport?
Please do not worry, we do standard export package.
We have 12 months warranty, if it broken during transport, we can change a new one for you. If it is broken after 12 months, we can supply you a new one at a cost price.
FAQ
1. Why choose us?
Low price:
We are end manufacturer instead of trader or dealer, saving a lot of medium cost, cutting the prices factually and saving money for customers.
High quality:
Our company focuses on product quality. We equip professional research and development team.
Good service:
We could provide product catalog and user manual to customer during inquiry stage. We will offer the installation and operation video, debug video and maintaining videoto our customer before Ex-work. Following link is the video address which is for our previous customer:
https://www.youtube.com/channel/UC4NDJI_tKsJIuaixCMDQF4w
We offer fast delivery and secure packing. We provide one year guarantee and long term spare parts supply at cost price.
2. How can I choose the suitable one?
We design and manufacture our testers based on ASTM, IP, ISO standards, so user may tell the exact standard or test method to us, and then we can offer our solution.
3. How can I pay?
We accept many payment terms, such as T/T, L/C, Western Union, PayPal, and money gram and so on.
4. When I receive it after pay?
Normally, we have testers in our stock, if not, we can deliver within 5-7 days, please contact us to check transport time and charge to your address.
5. What should I do if I do not know how to use?
Please do not worry, manual user will be sent together, also we can offer Operation and installation video, you can also contact us with more technological support.
6. What should I do if some parts broken?
Please do not worry, we have 12 months warranty except accessories, you can also buy parts from us after 12months.
7. Can I order OEM/ ODM services?
YES, product can be customized.
